SPRING SPACER SAAB 9-5 REAR STOCK OEM/SACHS

$44.95
(No reviews yet) Write a Review
SKU:
SAA95-OE

SAAB 9-5 REAR SUSPENSION SPACER KIT     FOR 1999-2008 SAAB 95 REAR SUSPENSION  ADJUST RIDE HEIGHT.

FITS SACHS SHOCKS OEM SAAB

Kit consists of 2 spacers, one for each shock.  25MM, 32MM, AND 38MM IN HEIGHT.  Select height desired when ordering.

 
Solve Saab 95 rear suspension problems with very versatile kit that allows you to start with proper ride height.  25mm, 32mm, and 38mm aluminum spacer for adjustment of ride height  

 Fits between the shock perch and the bottom of the spring

 
 
 
This kit [2 spacers] allows raising the spring by setting the preload by installing these spacers at the bottom of the rear coil spring.   These spacers are precision machined to fit the stock OEM spring perch with a perfect fit.  Stock stamped steel spring retainer is used above the spacer.
 
WE also have models for  Koni and KONI FSD rear shocks as well as Bilstein see our other listings.   
 
For OEM  and SACHS  Machine to fit the OEM spring perch
 
 The kit consists of one set [2] 25 mm aluminum spacer.
 
All instructions included. Includes ride height charts and chassis front and rear suspension alignment tables.   You must remove the rear strut and remove the spring with a spring compressor to install.
 
The rear springs on the Saab 95 tend to sag, especially the Aero model.  New springs may sag as well as used one.  Precise setting of ride height according to the manual specifications is the first and most important step to proper alignment.  With ride height at factory settings, camber and toe in adjustment are much easier, and tire wear and handling should improve.  No more rear tire rubbing, especially on wagons.

 

  • BRING YOUR SAAB 9-5 TO PROPER RIDE HEIGHT....NO MORE BOTTOMING
  • CORRECT CAMBER ADJUSTMENT
  • CORRECTS TOO MUCH TOE IN
  • 3 HEIGHTS AVAILABLE
  • FULL INSTALLATION INSTRUCTIONS